Free Delivery Available
Delivery postcode restrictions apply
Gazco Studio 2 Glass Fronted Conventional Flue Gas Fire
The Gazco Studio 2 Glass Fronted Conventional Flue Gas Fire is a spectacular fireplace designed to fit well with both modern and traditional homes The range of front choices and linings allow the homeowner to get the perfect style and enhance the design of the gas fire even more making it much more stunning With its aesthetics comes practicality, and this is an 81% efficient gas fire with a heat output of 6.89kW allowing every homeowner to enjoy the pleasant heat it emits Close by or far, this gas fire can be controlled using the included programable thermostatic remote control allowing the user to regulate the heat to his or her preference.
Features
Please Note
Lead times on products may vary, we do though aim to deliver within the timescales quoted. It is important that you do not book your installer before you have taken delivery of the item and have checked that it is free from damage. We will not be responsible for any charges incurred for the cancellation of installers.
Warm Air Ducting kit
The kit, for the insets only, which includes two 3 metre lengths of flexible ducting, allows you to heat up to two other living spaces. The Studio 3 has four ports so you can even add two kits if required, providing heat for up to four additional rooms.
Cool Wall Kit
Screw-mounted to the front flange of the outer firebox, the U-shaped attachments of the Cool Wall kit are designed primarily for studwork or false chimney breasts. The additional depth allows some of the heat to be vented up into the void above the firebox and then re-enter the room at a higher level. The effect is to produce a cooler wall immediately above the appliance than would otherwise be the case. The Cool Wall Kit is made in aluminised steel which can then be painted to match the decor of your room.
Edge Installation Kit
This kit is screw-mounted to the front flange of the outer firebox. The L-shaped attachments provide a 34/44.5mm† return against which high temperature plasterboard/screed can be butted up for the ‘clean edge’ look. The Edge Kit is made in aluminised steel which can then be painted to match the decor of your room. The Edge + has a decorative slim frame that fits over the finished installation opening.
